Cleaning Methods for Display Cabinets
If you are not careful, wooden display cabinetthe surface of a wooden display cabinet is very likely to be left with scorch marks. Do not panic; in general, wiping it promptly with a cloth will remove them. However, if the scorch mark is too deep, you can gently apply iodine tincture to it, or spread petroleum jelly over it, and then wipe with a soft cloth the next day to remove the scorch mark.
If a painted display cabinet gets dusty, you can wipe it with a piece of gauze wrapped around slightly damp tea grounds, or clean it with a dry cloth dipped in cold tea, which will leave the commercial furniture especially bright and shiny. However, after wiping the display cabinet with tea, remember to use a slightly damp cloth dipped in clean water to wipe the tea away, because tea usually leaves stains that, if left on the painted surface, will affect the original color of the display cabinet.
If the milk has expired and cannot be drunk, do not throw it away; you can use it to maintain the display cabinet. Soak a clean cloth in the milk, then use this cloth to wipe tables and other wooden display cabinets; it works very well at removing dirt. Finally, remember to wipe again with clean water, otherwise milk residue will leave a milky odor. This method is suitable for many types of display cabinets, such as leather, painted, marble, and melamine-faced ones.
Boil about 1,400 ml of pale beer, add 14 g of sugar and 28 g of beeswax, and stir well until fully blended. After the mixture cools, dip a soft cloth into it and wipe the wood; once the stains are wiped clean, rinse the residue with clean water, and finally dry with a soft dry cloth.
White Vinegar Cleaning Method
Mix white vinegar and hot water in a 1:1 ratio and gently wipe the stains on the display cabinet surface. If a stain is hard to remove, let the vinegar water sit on the stain for a while, then rub hard with a soft cloth, because acetic acid softens the dirt and lifts it from the display cabinet surface. This method is suitable for the maintenance of mahogany display cabinets and for cleaning other display cabinets stained by ink marks.
If a polished or varnished wood item is accidentally scorched by heat and left with a mark, first wipe it with lemon slices, or a cloth dipped in lemon juice, then wipe with a soft cloth soaked in hot water, and finally quickly dry it with a dry soft cloth to restore its original luster.
Toothpaste Cleaning Method
display cabinetThe white paint on the surface of a display cabinet will yellow over time, making it look old and far from fresh. You can apply a little toothpaste or tooth powder with a cloth and gently press it on; using the bleaching effect of the toothpaste, the paint color of the display cabinet can shift from yellow back to white. But never rub hard when wiping, because the abrasive in the toothpaste or tooth powder will wear off the paint and damage the display cabinet surface.
Egg White Cleaning Method
Over time, a few spots of stubborn dirt on a white leather sofa at home can be a headache. At this point, take a suitable amount of egg white, dip a cotton cloth in it, and repeatedly wipe the dirty areas on leather items such as the leather sofa. This method is especially effective for cleaning leather products, and the egg white also has a certain polishing effect, leaving the leather with its original sheen after use.
Display Cabinet Maintenance Tips
As everyone knows, everything needs maintenance, and display cabinets are no exception. We often clean and maintain display cabinets to keep them shiny. However, you may not realize that some incorrect cleaning and maintenance methods, although they make the cabinet look clean temporarily, actually cause potential damage to the display cabinet; your display cabinet may develop irreparable problems, producing the opposite of the intended effect. Below we explain several common problems in display cabinet maintenance and how to avoid them, hoping to help consumers.
When cleaning and maintaining a display cabinet, first make sure the cloth you use is clean. After cleaning or dusting, always turn it over or switch to a clean cloth before reuse. Do not be lazy and keep using the dirty side, as this only rubs the dirt repeatedly over the commercial furniture surface and will damage the glossy coating of the display cabinet.
Choose the Right Care Product
To maintain the original brightness of a display cabinet, there are two kinds of display cabinet care products: care spray wax and cleaning maintenance agent. The former is mainly for various wooden,polyester, painted, fireproof laminate and other materials, and comes injasmine and lemontwo different fresh scents. The latter is suitable for various wooden, glass, synthetic wood, or melamine display cabinets, and is especially suitable for mixed-material display cabinets. Therefore, if you can use a maintenance product that both cleans and cares, you will save a lot of valuable time.
Before using care spray wax and cleaning maintenance agent, it is best to shake them well first, then hold the spray can upright at a 45-degree angle so the liquid inside is fully released without losing pressure. Then lightly spray once onto a dry cloth from a distance of about 15 cm, and use it to wipe the commercial furniture for a good cleaning and maintenance effect. Also, after using the cloth, be sure to wash and dry it. As for display cabinets with fabric materials, such asfabric sofa, casual cushions, you can use a carpet cleaning maintenance agent. When using it, first remove the dust with a vacuum cleaner, then applycarpetcleaner by spraying a small amount onto a damp cloth and wiping.
A lacquered table that has held a wet teacup often retains an annoying ring of water marks. How can you remove them quickly? You can lay a clean damp cloth over the water mark on the tabletop, then use an iron at a lower temperature to iron over it, so that the moisture that has seeped into the lacquer film evaporates and the water mark disappears. However, when using this method, the cloth must not be too thin, andthe iron the iron temperature must not be set too high. Otherwise, the water mark on the tabletop may be gone, but that brand mark can never be removed.
